A Better Way to Read Your BroodMinder Sensors

HiveSense reads BroodMinder-TH, TH2, W3 and Scale devices over BLE and pins the data to full hive records — inspections, queens, treatments, harvests — with brood temperature flagged when it leaves the roughly 90–99°F band or swings, and a sudden weight drop of 5.5 lb (2.5 kg) between readings flagged automatically. Works offline. Free to install; sensor reading is on Pro.

Works alongside the MyBroodMinder app. No migration required.

Why read BroodMinder in a hive management app?

A BroodMinder reading anchored to the note “observed emergency queen cells” is the moment a queen event becomes a colony event. HiveSense flags the brood temperature leaving its band and the weight dropping past its threshold — then shows you which note you wrote just before it. Sensor data gets most of its value from context — which inspection happened just before that weight drop, which treatment started the week the humidity climbed, which queen was in place when brood temperature stabilized.

HiveSense keeps sensor readings in the same hive record as everything else you record about the hive. Temperature, humidity, and weight charts sit next to your inspection events and treatment dates in that record, so you can read cause and effect without scrolling through two separate apps to cross-reference dates.

You do not have to give up MyBroodMinder. The device keeps broadcasting, and any app can read it. HiveSense just gives you a second lens — one that includes everything else you care about in your apiary.

What does full BroodMinder support cover?

Direct BLE reads

No gateway, no hub, no Wi-Fi bridge. Walk up to the hive, open HiveSense, and the latest readings come straight from the sensor.

No gateway in between

Readings come straight off the sensor's Bluetooth broadcast each time you walk into range. Nothing to download, no hub to buy, no account in the middle.

Brood-temperature flags

HiveSense flags the brood nest when a reading drops below the roughly 90–99°F band, climbs above it, or starts swinging — and a cold brood nest puts a queen check on tomorrow’s task list, so you get a next action instead of a number.

Weight-drop detection

A sudden drop between consecutive BroodMinder scale readings is the signature of a colony that left. HiveSense puts a swarm check on that hive's task list so you know which hive and roughly when — and flags a slow decline separately, because that one usually means they are running short.

Readings tied to hive records

Sensor data lives in the same hive record as your inspections, queens, and treatments. Read weight drops against the swarm events or supersedures you logged.

Works offline

Bluetooth does not need cell signal. Read sensors in the middle of nowhere and see historical charts with zero connectivity.

Related HiveSense features

Further reading

Frequently asked questions

Which BroodMinder devices does HiveSense support?

HiveSense reads BroodMinder-TH and TH2 (temperature + humidity), BroodMinder-W3 and Scale (hive weight), and the SubHub relay over Bluetooth Low Energy. Readings come straight off the device — no gateway and no cloud round-trip. Sensor reading is a HiveSense Pro feature; there is no extra vendor subscription.

Do I have to abandon the MyBroodMinder app?

No. The BroodMinder Bees app and any BroodMinder hub keep uploading your sensor data to MyBroodMinder exactly as before — nothing about the sensor or your MyBroodMinder dashboard changes. HiveSense reads BroodMinder, BEEP, and standard Bluetooth weight scales into one offline hive record, all anchored to the same inspection, queen, and treatment records. MyBroodMinder keeps doing what it does; HiveSense adds the interpretation layer across every supported sensor you already own.

Does this work without internet?

Yes. BLE is a direct phone-to-sensor protocol, so sensor reads work offline. HiveSense stores readings in an on-device database, so you can see historical data without any signal. Cloud sync is optional.

How often does HiveSense read the sensor?

BroodMinder devices broadcast their current temperature, humidity or weight reading over Bluetooth. HiveSense reads that broadcast each time you come into range, which BroodMinder puts at a few meters from a phone, and files it against the hive. There is nothing to download and no gateway in between.

Can I see charts of temperature, humidity, and weight?

Yes. Each hive has a sensor readings view with line charts for temperature, humidity, and weight over time. The inspections and treatments you log sit in the same hive record, so you can read those readings against them, in the same hive record.

What does it cost to read BroodMinder data?

Sensor reading is part of Pro, $5.99/mo. There are no add-on fees, gateway fees, or BLE limits on top of that — read as many sensors as you have hives. The free tier covers up to 5 hives of inspections, voice notes, and queen tracking, without sensor support.

What other sensors does HiveSense support?

Beyond BroodMinder, HiveSense reads BEEP base sensors and any hive scale that implements the standard Bluetooth Weight Scale profile. General-purpose temperature and humidity loggers are not read today.

Why read BroodMinder in a hive management app?

A raw BroodMinder reading is a number; the value is the interpretation. HiveSense anchors each reading to the inspection, queen, and treatment in the same offline hive record, flags brood temperature when it leaves the roughly 90–99°F band or starts swinging, flags a weight drop of 5.5 lb (2.5 kg) between readings and a slow loss separately, and puts each flag next to the inspection you logged — so you get the read, not just the chart. Academic work on hive sensor time series — BeeViz (Nature Scientific Reports, 2026), for example — runs cloud-side models over the sensor stream on its own; our approach is deliberately simpler and different: fixed thresholds, applied on your phone, next to the inspection you logged, with no model and no cloud round-trip.

What does full BroodMinder support cover?

HiveSense reads BroodMinder-TH, TH2, W3 and Scale over BLE with no gateway or cloud round-trip: direct reads off the sensor broadcast, brood-temperature flags against a roughly 90–99°F band, and weight-curve flags for a sudden drop or a sustained decline — all tied to your hive records and working fully offline.

Read your BroodMinder the offline way

Free for up to 5 hives of records. Sensor reading is on Pro, $5.99/mo. Works alongside MyBroodMinder.

Read the BroodMinder setup guide